Facebook上Just Race Parts广告库

🔥 The JRP 14in1 v2.6 Systems Are Here 🔥 👍Our All-In-One Gauge Just Got Better👍 We are extremely proud to announce the release of our JRP 14in1 v2.6 Multi Gauge systems. After enormous success since the release of the v2.5 in 2021, we now have tens of thousands of vehicles running these gauges & have grown a cult following because of our integrity around reliability, accuracy, and an extremely well-priced all in one automotive gauge solution. We have added more innovative features to the v2.6 systems that a lot of other gauge manufacturers miss, the 14in1 has always had sophisticated warnings, high quality sensors & features that you just don’t find on a lot of other automotive gauges in the market. With the latest v2.6, we have brought more to the table once again. We have some amazing new addon options which further enhance engine protection. There are now 3 new addon packs for the v2.6 customers can purchase to take their engine protection to a higher level. We have also built on our Diesel wideband support, by adding a Diesel Rich warning to the systems for customers wanting to run our Spartan 3D Diesel wideband as well. The Head Guard addon pack will enable these gauges to add a Low Coolant sensor & alarm to the gauge. And the Head Guard Ultra addon pack, this has the low coolant sensor & alarm, but also has a water pressure sensor which can monitor pressures in your radiator system & sound a high pressure alarm if they exceed normal levels. The Auxiliar

The Edge 52mm gauge range just got bigger, checkout the new additions today 👇 Since the hugely successful release of the JRP Edge 52mm gauges back in July 2021, we didn’t waste any time in getting our engineering team onto development of a few more models to complement the existing range. On top of this, the Spartan 3 wideband range is now fully back in stock, we have wideband products that will cover all bases, be it petrol, e85, methanol, we have CAN based widebands, the option of using the latest ADV sensors over the older 4.9’s, it’s never been a better time to upgrade your gauge sets, or just add to your existing setup. We recently added another 7 gauges to the Edge 52mm line-up, these include a gauge model that isn’t overly common, but anyone with a decent track or performance car that is turbocharged or supercharged may find very useful. This is the IAT gauge, also know as intake air temperature gauge. These gauges are used to measure the temp of the air entering the motor post intercooler, and in almost all cases in performance cars that have forced induction, keeping an eye on intake air temps can be important, especially those running water to air intercoolers. Another cool little addition to the range is the JRP 52mm Tacho + Shift light, this was another inhouse JRP innovation, we really should have called this one the JRP shift light, because the Tacho readout is more a secondary use and a bonus. These little gauges can be setup in a way where they a

The Edge 52mm gauge range just got bigger, checkout the new additions today 👇 Since the hugely successful release of the JRP Edge 52mm gauges back in July 2021, we didn’t waste any time in getting our engineering team onto development of a few more models to complement the existing range. On top of this, the Spartan 3 wideband range is now fully back in stock, we have wideband products that will cover all bases, be it petrol, e85, methanol, we have CAN based widebands, the option of using the latest ADV sensors over the older 4.9’s, it’s never been a better time to upgrade your gauge sets, or just add to your existing setup. We recently added another 7 gauges to the Edge 52mm line-up, these include a gauge model that isn’t overly common, but anyone with a decent track or performance car that is turbocharged or supercharged may find very useful. This is the IAT gauge, also know as intake air temperature gauge. These gauges are used to measure the temp of the air entering the motor post intercooler, and in almost all cases in performance cars that have forced induction, keeping an eye on intake air temps can be important, especially those running water to air intercoolers. Another cool little addition to the range is the JRP 52mm Tacho + Shift light, this was another inhouse JRP innovation, we really should have called this one the JRP shift light, because the Tacho readout is more a secondary use and a bonus. These little gauges can be setup in a way where they a

Sick of the Diesel tax, or low quality gauges pretending to be Diesel specific? 👍 Then take a look at JRP’s dedicated range of gauge solutions for off road and on road Diesel 4x4’s. We have also just released the Edge v1.5 series gauges as well, these latest models come with a feature we call CPW, and feel this will be a game changer in how customers use gauges such as EGT & Water Temp. Make sure to checkout our Colour Pre-Warn explainer video, as it shows off how this amazing little feature will change the way you use your temperature based gauges. In 2022 we added a couple more dedicated Diesel gauges, such as Boost from 0-30psi & 0-60psi, a gauge that isn’t seen too often called IAT, also known as intake air temp, we added a dedicated transmission temp gauge for those with automatic transmissions and a bunch more. This is already on top of our extremely popular gauges for Diesel, our 2in1 Boost & EGT, our standalone EGT, Water Temp to name a few. We have taken the interest in our products from the Diesel community seriously, after the huge following of our 14in1 multi gauge systems achieved from the Diesel crowd, in large part due to our acknowledgment of this customer base, by adding features that mattered most to them, we have done the same thing with our Edge 52mm range, making sure to offer gauges that matter most to this customer base we have grown to love servicing and supporting. All of our EGT gauge products now have the option of two great EGT sensor

🔥 The JRP 14in1 v2.6 Systems Are Here 🔥 👍Our All-In-One Gauge Just Got Better👍 We are extremely proud to announce the release of our JRP 14in1 v2.6 Multi Gauge systems. After enormous success since the release of the v2.5 in 2021, we now have tens of thousands of vehicles running these gauges & have grown a cult following because of our integrity around reliability, accuracy, and an extremely well-priced all in one automotive gauge solution. We have added more innovative features to the v2.6 systems that a lot of other gauge manufacturers miss, the 14in1 has always had sophisticated warnings, high quality sensors & features that you just don’t find on a lot of other automotive gauges in the market. With the latest v2.6, we have brought more to the table once again. We have some amazing new addon options which further enhance engine protection. There are now 3 new addon packs for the v2.6 customers can purchase to take their engine protection to a higher level. We have also built on our Diesel wideband support, by adding a Diesel Rich warning to the systems for customers wanting to run our Spartan 3D Diesel wideband as well. The Head Guard addon pack will enable these gauges to add a Low Coolant sensor & alarm to the gauge. And the Head Guard Ultra addon pack, this has the low coolant sensor & alarm, but also has a water pressure sensor which can monitor pressures in your radiator system & sound a high pressure alarm if they exceed normal levels. The Auxiliar

The BEST Dual Boost & EGT Gauge Is HERE 🔥 Now With CPW © - Colour Pre-Warn🚦 ✅ It’s no longer a secret that JRP is making some of the best automotive gauges on the market, and at prices that don’t break the bank, which is important in times like these. We are committed to providing incredible value, quality, reliability & innovative functions to all our gauges. Our Edge v1.5 Boost & EGT gauge is one of our most popular offerings for our Diesel customer base, and now this amazing little gauge comes with our latest feature called CPW. 👇 New Features: All Version 1.5 Edge Series Gauges ✅ CPW - Colour Pre-Warn ✅Customisable Colour Pre-Warnings ✅Temperature Driven Colour Change ⚠️2-Stage Warning System 👍Fixes Constant Alarms 💥Respond Faster & Avoid Engine Damage ✅Peripheral Vision Warning At JRP we are always trying to innovate, so when looking at our 52mm temperature based gauges, we asked ourselves once again, how we can make these better for our customers. With the JRP Edge v1.5 temperature gauges, you now have a two stage warning system, one which works the same as other gauges where you set a final value for a warning that will trigger an alarm on the gauge, but now there is a softer secondary warning system you can choose to enable which will pre-alert you that the gauges are reaching higher levels than normal and alert you using the gauges bright colours as you approach the final hard limit warning. Checkout our website for more info

The Edge 52mm gauge range just got bigger, checkout the new additions today 👇 Since the hugely successful release of the JRP Edge 52mm gauges back in July 2021, we didn’t waste any time in getting our engineering team onto development of a few more models to complement the existing range. On top of this, the Spartan 3 wideband range is now fully back in stock, we have wideband products that will cover all bases, be it petrol, e85, methanol, we have CAN based widebands, the option of using the latest ADV sensors over the older 4.9’s, it’s never been a better time to upgrade your gauge sets, or just add to your existing setup. We recently added another 7 gauges to the Edge 52mm line-up, these include a gauge model that isn’t overly common, but anyone with a decent track or performance car that is turbocharged or supercharged may find very useful. This is the IAT gauge, also know as intake air temperature gauge. These gauges are used to measure the temp of the air entering the motor post intercooler, and in almost all cases in performance cars that have forced induction, keeping an eye on intake air temps can be important, especially those running water to air intercoolers. Another cool little addition to the range is the JRP 52mm Tacho + Shift light, this was another inhouse JRP innovation, we really should have called this one the JRP shift light, because the Tacho readout is more a secondary use and a bonus. These little gauges can be setup in a way where they a

Want the best Diesel 4x4 gauge solution? ✅ Checkout the JRP 14in1! 🔥 It’s no secret now that the JRP 14in1 is one of the most comprehensive, affordable & quality gauge solutions for Diesel 4x4 owners in the world. That’s a pretty bold claim, but it’s honestly the truth, we manage to pack almost every single major requirement Diesel owners are looking for in a gauge solution into one single compact package, no more gauges spread throughout the cabin, just one neat little screen that can handle everything the majority of diesel owners require to monitor on their vehicles. No other gauge system in this price range offers the combination of readouts the JRP 14in1 can, we made sure to have Boost, EGT, Water Temp, Oil Pressure, Trans Temp, Dual Volts. And for those even more serious about their Diesel motors, we even have support for a diesel wideband which we also sell & can supply, the Spartan 3D, so you can keep an eye not only on EGT’s, but air fuel ratios of the motor as well with a diesel specific AFR of 10-40. We have two options for great quality EGT sensors, the v2’s which have been running in rigs since 2018, and now also the v3’s which have been beefed up in area’s that matter for those Diesel guys that give EGT sensors a hard time. All our sensors are great quality, accurate, reliable and can take the punishment of hard off-road use, or are just as happy being fitted to a good old tow vehicle. If you want to give your multiple gauge setup the fli

Sick of the Diesel tax, or low quality gauges pretending to be Diesel specific? 👍 Then take a look at JRP’s dedicated range of gauge solutions for off road and on road Diesel 4x4’s. We have also just released the Edge v1.5 series gauges as well, these latest models come with a feature we call CPW, and feel this will be a game changer in how customers use gauges such as EGT & Water Temp. Make sure to checkout our Colour Pre-Warn explainer video, as it shows off how this amazing little feature will change the way you use your temperature based gauges. In 2022 we added a couple more dedicated Diesel gauges, such as Boost from 0-30psi & 0-60psi, a gauge that isn’t seen too often called IAT, also known as intake air temp, we added a dedicated transmission temp gauge for those with automatic transmissions and a bunch more. This is already on top of our extremely popular gauges for Diesel, our 2in1 Boost & EGT, our standalone EGT, Water Temp to name a few. We have taken the interest in our products from the Diesel community seriously, after the huge following of our 14in1 multi gauge systems achieved from the Diesel crowd, in large part due to our acknowledgment of this customer base, by adding features that mattered most to them, we have done the same thing with our Edge 52mm range, making sure to offer gauges that matter most to this customer base we have grown to love servicing and supporting. All of our EGT gauge products now have the option of two great EGT sensor